12 Quizzes by Karen.urate


Classic
Quiz General knowledge
General knowledge
22 QUESTIONS
Q1. How are called the first three bytes of the MAC address?
A) Vendor code or serial number
B) Vendor assigned OUI
Q2. How are called the last three bytes of the MAC address?
A) Vendor code or serial number
B) Vendor assigned OUI
Q3. What is a characteristic of a contention-based access method?
A) It is a nondeterministic method.
B) It scales well under heavy media use.

CCNA 1 - Chapter 5 (Part 1)

294 played - 11 yrs ago

Chapter 5 (Part 1)

Medium QUIZ 22 QUESTIONS
medium
Classic
Quiz General knowledge
General knowledge
14 QUESTIONS
Q1. Refer to the exhibit. The exhibit shows a small switched network and the contents of the MAC address…
A) The switch will discard the frame.
B) The switch will forward the frame to all ports except port 4.
C) The switch will forward the frame only to port 2.
Q2. Store-and-forward switch or Cut-through switch? It always stores the entire frame before forwarding.
A) Store-and-forward switch
B) Cut-through switch
Q3. Store-and-forward switch or Cut-through switch? It checks the CRC before forwarding.
A) Store-and-forward switch
B) Cut-through switch

CCNA 1 - Chapter 5 (Part 2)

104 played - 11 yrs ago

Chapter 5 (Part 2)

Medium QUIZ 14 QUESTIONS
medium
Classic
Quiz General knowledge
General knowledge
20 QUESTIONS
Q1. Operates in the 5 GHz frequency band and offers speeds of up to 54 Mb/s.
A) 802. 11g
B) 802. 11a
C) 802. 11b
Q2. Operates in the 2. 4 GHz frequency band and offers speeds of up to 54 Mbps.
A) 802. 11g
B) 802. 11a
C) 802. 11b
Q3. Operates in the 2. 4 GHz frequency band and offers speeds of up to 11 Mbps.
A) 802. 11g
B) 802. 11a
C) 802. 11b

CCNA 1 - Chapter 4 (Part 2)

85 played - 11 yrs ago

Chapter 4 (Part 2)

Hard QUIZ 20 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
30 QUESTIONS
Q1. Select the most appropriate access method : you are in the equipment room with a new switch that needs…
A) Telnet/SSH
B) Console
C) Auxiliary
Q2. Select the most appropriate access method : the device you are configuring cannot be accessed by cable,…
A) Telnet/SSH
B) Console
C) Auxiliary
Q3. Select the most appropriate access method : your manager gives you a special cable and tells you to use…
A) Telnet/SSH
B) Console
C) Auxiliary

CCNA 1 - Chapter 2

1.0 k played - 11 yrs ago

Chapter 2

Hard QUIZ 30 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
23 QUESTIONS
Q1. What is a benefit of using a layed model for network communications?
A) Fostering competition among device and software vendors by enforcing the compatibility of their products
B) Simplifying protocol development by limiting every layer to one function
C) Avoiding possible incompatibility issues by using a common set of developing tools
Q2. A user is viewing an HTML document located on a web server. What protocol segments the messages and manages…
A) TCP
B) DHCP
C) ARP
Q3. What is the general term that is used to describe a piece of data at any layer of a networking model?
A) Protocol data unit
B) Packet
C) Frame

CCNA 1 - Chapter 3 (Part 1)

668 played - 11 yrs ago

Chapter 3 (Part 1)

Medium QUIZ 23 QUESTIONS
medium
Classic
Quiz General knowledge
General knowledge
30 QUESTIONS
Q1. Which layer of the OSI model is responsible for specifying the encapsulation method used for specific…
A) Data link
B) Transport
C) Application
Q2. Which statement describes signaling at the physical layer?
A) Sending the signals asynchronously means that they are transmitted without a clock signal.
B) Signalling is a method of converting a stream of data into a predefined code.
C) Wireless encoding includes sending a series of clicks to delimit a frame
Q3. Data signals are sent along with a clock signal which occurs at evenly spaced time durations referred…
A) Synchronous
B) Asynchronous
C) Morse code

CCNA 1 - Chapter 4 (Part 1)

406 played - 11 yrs ago

Chapter 4 (Part 1)

Hard QUIZ 30 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
24 QUESTIONS
Q1. Which two commands can be used on a Windows host to display the routing table?
A) Route print, netstat -r
B) Show ip route, route print
Q2. Which IPv4 header field is responsible for defining the priority of the packet?
A) Flow label
B) Differentiated services
C) Traffic class
Q3. Which IPv6 header field contains a 6-bit Differentiated Services Code Point (DSCP) value used to classify…
A) Flow label
B) Differentiated services
C) Traffic class

CCNA - Chapter 6

233 played - 11 yrs ago

Chapter 6

Medium QUIZ 24 QUESTIONS
medium
Classic
Quiz General knowledge
General knowledge
30 QUESTIONS
Q1. What splits the access line into three signals?
A) DSL
B) Cable
C) Satellite
Q2. What provides a high bandwidth, always on, connection to the Internet?
A) DSL
B) Dial-up
C) Satellite
Q3. What provides a high bandwidth, always on, connection to the Internet?
A) Dial-up
B) Satellite
C) Cable

Ccna 1

162 played - 11 yrs ago

Chapter 1

Hard QUIZ 30 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
7 QUESTIONS
Q1. Which two flags in the TCP header are used in a TCP three-way handshake to establish connectivity between…
A) Fin, psh
B) Syn, ack
C) Urg, rst
Q2. Compared to UDP, what factor causes additional network overhead for TCP communication?
A) Network traffic that is caused by retransmission
B) The checksum error detection
Q3. What does a client do when it has UDP datagrams to send?
A) It sends a simplified three-way handshake to the server
B) It just sends the datagrams

CCNA - Chapter 7

129 played - 11 yrs ago

Chapter 7

Medium QUIZ 7 QUESTIONS
medium
Classic
Quiz General knowledge
General knowledge
14 QUESTIONS
Q1. What is indicated by a successful ping to the : : 1 IPv6 address?
A) TCP/IP stack is correctly installed
B) The host is cabled properly
C) The default gateway address is correctly configured
Q2. An IPv6 enabled device sends a data packet with the destination address of FF02 : : 1. What is the target…
A) A multicast group
B) A broadcast group
C) A unicast group
Q3. When will a router drop a traceroute packet?
A) When the router receives an ICMP Time Exceeded message
B) When the value in the TTL field reaches zero

CCNA - Chapter 8 & 9

122 played - 11 yrs ago

Chapter 8 & 9

Hard QUIZ 14 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
10 QUESTIONS
Q1. _________ is an international standards and trade organization for electronics organizations.
A) TIA
B) EIA
C) ITU-T
Q2. _________ is responsible for developing communication standards in a variety of areas including radio…
A) TIA
B) EIA
C) ITU-T
Q3. _____ defines standards for video compression, Internet Protocol Television (IPTV), and broadband communications,…
A) TIA
B) EIA
C) ITU-T

CCNA 1 - Chapter 3 (Part 2)

87 played - 11 yrs ago

Chapter 3 (Part 2)

Hard QUIZ 10 QUESTIONS
hard
Classic
Quiz General knowledge
General knowledge
10 QUESTIONS
Q1. How do we call a message that is used to identify the explicit server and lease offer to accept?
A) Dhcprequest
B) Dhcpdiscover
C) Dhcpack
Q2. How do we call a message that is used to locate any available DHCP server on the network?
A) Dhcprequest
B) Dhcpdiscover
C) Dhcpoffer
Q3. How is called a message that is used to suggest a lease to a client?
A) Dhcprequest
B) Dhcpdiscover
C) Dhcpoffer

CCNA - Chapter 10 & 11

70 played - 11 yrs ago

Chapters 10 & 11

Medium QUIZ 10 QUESTIONS
medium